WHY NOT ?: DIY GARTER TIGHTS

SUNDAY FUNDAY ;)!

I know my faithful viewers have been waiting for me to post this step by step tutorial on my DIY GARTER LEGGINGS ... well here it goes ; )

( sorry for the picture quality but I will be getting a professional camera soon!! )

WHAT YOU NEED:

- a pair of tights

- scissors

- black rope, string, ( anything you can use to tie something together )

PART 1

PART 2

STEP ONE:

- Cut your tights to your desired length . I cut my tights a couple of inches above my knee.

- It is a great idea to try on the tights beforehand and mark with a pen or white eyeliner lightly where you plan to cut the tights.

STEP TWO:

- Your tights are now in half and it will look like the picture above.

STEP THREE:

- At the end of the top half of your tights , cut a tiny hole through the front and the back.

- Make sure the hole is not at the very bottom because you need something for your string/rope to hang on to.

STEP FOUR:

- Stick your fingers through the hole to stretch out the hole so it looks like what is being shown above.

STEP FIVE:

- REPEAT step four to the bottom half of your tights .

- Once your finished it should look like this.

STEP SIX:

- Cut your rope/string into four short identical pieces, about 4-5 inches each.

- Lay your top and bottom half of your tights down on a flat surface.

- Match your top front hole with your bottom front hole .

- Loop your rope in between the two holes joining them together.

- REPEAT UNTIL ALL YOUR HOLES ARE JOINED TOGETHER.

STEP SEVEN:

- This is what your tights will look like once your bottom and top half are joined together by the rope.

STEP EIGHT:

- Finish project!

YOUR LEGGINGS ARE COMPLETE! ;)

Below are pictures of me wearing the leggings. I will post more pictures with me wearing my tights in some upcoming posts.

Hope you enjoyed and will try to make some of your own ;)!!

Pages